Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Fuel Pressure Regulator: Service and Repair
Fig 18 Fuel Pressure Regulator
The fuel pressure regulator is part of the fuel pump module (Fig. 18). Remove the fuel pump module from the fuel tank to access the fuel pressure
regulator.
WARNING: Fuel system pressure must be released before servicing any fuel system component. Perform the fuel system pressure release
procedure.
REMOVAL
1. Spread tangs on pressure regulator retainer (Fig. 18).
2. Pry fuel pressure regulator out of housing.
3. Ensure both upper and lower 0-rings were removed with regulator.
Fig 19 Fuel Pressure Regulator O-rings
INSTALLATION
1. Lightly lubricate the 0-rings with clean engine oil and place them into opening in pump module (Fig. 19).
2. Push regulator into opening in pump module.
3. Fold tangs on regulator retainer over tabs on housing.
