Town & Country Van 2WD V6-230 3.8L VIN L SMFI (1997)
Stabilizer Bushing: Service and Repair
If stabilizer bar to front suspension cradle bushings require replacement at time of inspection install new bushings before installing stabilizer bar.
Stabilizer bar bushings are replaced by opening the slit on the bushings and peeling them off the stabilizer bar. Install new bushings on stabilizer bar, by
spreading bushing at slit and forcing them on stabilizer bar.
NOTE: Bushings must be installed on stabilizer bar so the square corner of the bushing will be down and slit in bushing will be facing the rear of the
vehicle when the stabilizer is installed.