Town & Country Van AWD V6-201 3.3L VIN R MFI (1992)
Mark the tire AND wheel at the point of highest runout. Remove the tire from the wheel and check the wheel runouts (check BOTH sides of the wheel at
the bead seats (refer to Figure 2) with wheel mounted on an off car balancer.
SPECIFICATIONS:
Radial runout:
0.030 in. (0.762 mm) or LESS
Lateral runout:
0.030 in. (0.762 mm) or LESS
NOTE:
HUB MEASUREMENTS APPLY TO FRONT HUBS ONLY ON FRONT WHEEL DRIVE (FWD) VEHICLES AND TO FRONT AND REAR
HUBS ON ALL WHEEL DRIVE (AWD) VEHICLES.
