chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

All Other Service Bulletins for Windshield: > < Backlight/Windshield Moulding - Glue Oozing Out
Page 1
background image

Windshield: All Technical Service Bulletins
Windshield/Cowl - Squeak Elimination

NO: 23-27-94
GROUP: Body
DATE: Mar. 18, 1994

SUBJECT:
Squeak Noise At The Base Of The Windshield

MODELS:
1994 (AS) Town & Country/Caravan/Voyager

DISCUSSION:

Water soluble support spacers are used in the windshield installation process at the assembly plant to properly position the windshield. During the transit
and vehicle predelivery processes, if enough water does not come in contact with the windshield support spacers, they may not dissolve as intended and
may cause a squeaking noise. Typically, enough water contacts the windshield support spacers during a car wash.

Prior to delivering the new vehicle to the customer, look for the support spacers at both sides of the base of the windshield (refer to the illustration). If
the support spacers are still in place, raise the cowl and pry them out or slowly pour two gallons of hot water directly on them until they dissolve. This
will prevent the customer from experiencing a squeak condition on the new vehicle.

POLICY:   Information Only

All Other Service Bulletins for Windshield: > < Backlight/Windshield Moulding - Glue Oozing Out