Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Driver/Vehicle Information Display: Service and Repair
Message Center
REMOVAL
1. Remove A-pillar trim.
2. Remove instrument panel top cover. Refer to instrument panel top cover removal procedures.
3. Disconnect the wire connector from back of message center.
4. Remove screws holding message center to instrument panel top cover.
5. Remove message center from instrument panel top cover.
INSTALLATION
1. Place message center in position on top cover.
2. Install screws to hold message center to instrument panel top cover.
3. Connect wire connector into back of message center.
4. Install instrument panel top cover.
5. Install A-pillar trim.
