chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Relays and Modules - Accessories and Optional Equipment > < D-Pillar Speaker|Page 7784
Page 1
background image

Tape Player: Service and Repair

REMOVAL

1. Remove HVAC switch bezel. 

Radio

2. Remove screws holding radio to instrument panel.

Radio Connectors

3. Pull radio rearward to gain access to back of radio.
4. Remove bolt holding ground strap to back of radio.
5. Disconnect antenna cable from back of radio.
6. Disconnect the wire connectors from back of radio.
7. Remove radio from vehicle.

INSTALLATION

-

For Installation, reverse the above procedures.

Relays and Modules - Accessories and Optional Equipment > < D-Pillar Speaker|Page 7784