chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

A-Pillar Lower Extension|Page 8075 > < A-Pillar Lower Extension|Page 8073
Page 4
background image

INSTALLATION

1.  Place sill plate in position on vehicle.

2.  Align locating pins on backside of trim plate to mating holes in door sill.

3.  Engage hidden clips to hold door sill plate to door sill.

Front Door Trim Panel

REMOVAL

1. Using a trim stick (C-4755), pry courtesy lamp from door trim.
2. Disconnect wire connector from courtesy lamp.
3. If equipped, remove screws attaching door assist handle to inner door panel.
4. If equipped, remove screw attaching door pull cup to inner door panel.
5. If equipped, remove screws attaching trim panel to door from below map pocket.
6. If equipped, remove window crank.
7. Using a trim stick, remove screw cover from switch panel.
8. Remove screws attaching switch panel to door trim.

Fig.32 Front Door Switch Panel

9. Remove power accessary switch from door trim.

A-Pillar Lower Extension|Page 8075 > < A-Pillar Lower Extension|Page 8073