Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Seat Memory Switch: Description and Operation
SYSTEM OPERATION
Memory Selector Switches
The memory selector switches are mounted on the driver's door trim panel within easy reach of the driver. They provide a means to set or recall
either of two positions of seat and recliner, and the side view mirrors as chosen by the driver.
The inputs from these switches to the memory seat/mirror module is a ground level signal.
1. Adjust the seat, recliner and side view mirrors to the desired position.
2. Press momentarily and release memory switch S.
3. Press momentarily and release memory switch 1 or 2. Do NOT press any switches for 10 seconds.
4. To program the second driver's position, follow the above sequence.
5. To recall either of the programmed positions momentarily press and release either memory selector switch 1 or 2.
Definition Of: Momentarily And Release
The memory seat/mirror module has switch input timing requirements of a minimum press momentarily time of 250 milliseconds followed by
a maximum hold time of 5 seconds, followed by a maximum release time between steps of 5 seconds that must be met for proper operation of
the system.
