Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Installation
CAB 25 Way Connector
1. Install the Controller Antilock Brake (CAB) on the bottom of the Hydraulic Control Unit (HCU).
HCU Mounting Bolts
2. Install the HCU on the mounting bracket. Install the 3 bolts attaching the HCU to the mounting bracket. Tighten the 3 mounting bolts to a torque
of 11 Nm (97 inch lbs.).
CAUTION: The HCU mounting bracket to front suspension cradle mounting bolts have a unique corrosion protection coating and a special
aluminum washer. For this reason, only the original, or original equipment Mopar replacement bolts can be used to mount the HCU bracket to the
front suspension crossmember.
HCU To Suspension Cradle Mounting Bolts
3. Install the HCU and its mounting bracket as an assembly on the front suspension crossmember. Install the 3 bolts attaching the HCU bracket to the