Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
2.
Remove right rear tire and wheel assembly.
3.
Remove the cotter pin, nut retainer, and spring washer the from the stub shaft on the outer C/V joint (Fig. 1).
4.
Remove the hub nut and washer from the stub shaft of the outer CV joint.
5.
Mark the driveshaft inner joint location to the rear driveline module flange.
6.
Remove the 6 bolts mounting the driveshaft inner joint to the output shaft of the rear driveline module (Fig. 2).
