Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Brake Shoe: Service and Repair
Cleaning and Inspection
1. Remove the tire and wheel assembly from the vehicle
Brake Adjustment Hole Rubber Plug
2. Remove the rear brake adjusting hole cover plug.
3. Insert a thin screwdriver into brake adjusting hole to hold the adjusting lever away from the notches on the adjusting screw star wheel.
4. Insert Tool C-3784 or equivalent into brake adjusting hole and engage notches of brake adjusting screw star wheel. Release brake by prying down
with adjusting tool.
5. Remove the rear brake drum from the rear hub/bearing assembly.
6. Inspect brake lining for wear, shoe alignment, and or contamination from grease or brake fluid.