Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Tube End Properly Prepared For Flaring
Using Tubing Cutter, Special Tool C-3478-A or equivalent, cut off damaged seat or tubing. Ream out any burrs or rough edges showing on inside of
tubing. This will make the ends of tubing square and ensure better seating of flared end tubing. PLACE TUBE NUT ON TUBING BEFORE FLARING
THE TUBING.
Double Inverted Tubing Flares
Inverted Flare And ISO Flare
