Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
17.
Remove bolts from generator to intake manifold bracket. Loosen top generator mounting bolt, and move bracket up so intake manifold can clear
mounting studs.
18.
Remove intake manifold bolts and remove the manifold.
19.
Cover intake manifold with suitable cover when servicing.
20.
Remove vacuum harness connector from Fuel Pressure Regulator.
21.
Remove fuel tube retainer bracket screw and fuel rail attaching bolts. Spread the retainer bracket to allow fuel tube removal clearance.
22.
Disconnect cam sensor and coolant temperature sensor.
23.
Remove fuel injector wiring clip from intake manifold water tube.
