Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Crankshaft Oil Seal-installation
1. Install new seal using Special Tool C-4992.
2. Place seal into opening with seal spring towards the inside of engine. Install seal until flush with cover.
Crankshaft Damper-Installation
3. Install crankshaft pulley using plate L-4524. Thrust Bearing/washer and C-4685-C1, 5.9 inch screw.
4. Install accessory drive belt.
5. Install inner splash shield and wheel.
6. Lower vehicle and connect negative cable to battery.
