Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Crankshaft Oil Seal-Installation
7. Install crankshaft oil seal.
Crankshaft Damper-Installation
8. Install crankshaft pulley.
9. Install engine bracket and torque fasteners to 54 Nm (40 ft. lbs.).
10. Install idler pulley on engine bracket.
11. Install cam sensor. Refer to Ignition System for installation procedure.
12. Install A/C compressor mounting bracket.
13. Install A/C compressor.
14. Install drive belt Refer to Cooling System for installation procedure.
15. Install inner splash shield and wheel.
16. Install oil pump pick-up and oil pan and transaxle inspection cover if removed.
17. Install engine mount.
18. Fill crankcase with oil to proper level.
19. Fill cooling system.
20. Connect negative cable to battery.
