Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Accelerator Pedal
10. Pull up on accelerator pedal and slide heater core past.
Brake Pedal
11. Depress brake pedal and remove heater core from HVAC housing.
INSTALLATION
-
For installation, reverse the above procedures. Install screws to retain heater core in housing. Replace heater core tube inlet O-rings. Tighten heater
core tube retaining plate to 3 ± 1 N.m (27 ± 9 in. lbs.) torque.