Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Recirculation Door
7. Remove Recirc door.
HVAC Cover
8. Remove screws around the pen meter of the upper HVAC housing.
CAUTION: Do not damage the insulation barrier surrounding the evaporator.
Evaporator
9. Carefully pull up on evaporator and remove from housing.
10. If replacing evaporator, drain and measure amount of oil from old evaporator and add new oil of the same amount (ND8 PAG) to the new
evaporator before installing. Use SP 10 PAG oil for 2.5L diesel and 2.0L gasoline engine vehicles.
ASSEMBLY
1. For reassembly of the evaporator housing, reverse the above procedures.
2. Perform the HVAC control Calibration Diagnostic and Cool-down test. See: Testing and Inspection
