Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Powertrain Control Module: Service and Repair
Fig 29 Power Distribution Center Retaining Screws
REMOVAL
1. Disconnect both cables from battery, negative cable first.
NOTE: On some models you will need to perform the LED reset procedure (LED's Flashing) after disconnecting the battery. See: Heating and Air
Conditioning/Testing and Inspection
2. Remove 2 screws holding Power Distribution Center (PDC) to bracket (Fig. 29).
Fig 30 Battery Heat Shield
3. Remove heat shield from battery (Fig 30).
