Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
EGR Backpressure Transducer: Service and Repair
EGR Mounting
REMOVAL
1. Disconnect EGR transducer electrical connector and vacuum hose. (Inspect vacuum hose for any damage.)
2. Remove EGR valve to intake manifold bolts.
3. Open transducer clip and remove transducer.
4. Remove EGR valve.
5. Clean gasket surface and discard old gasket.
6. Inspect for signs of leakage or cracks.
INSTALLATION
1. Loosely install EGR valve with new gasket.
2. Torque bolts to 200 in lb (22 Nm).
3. Install transducer in clip with orientation tab in slot and snap closed.
4. Connect vacuum hose and electrical connector.
