Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
-
Driver airbag line 1 shorted to line 2
-
Loose, or poor connector not completely connected
Driver Squib Term Shorted to Battery
NAME OF CODE
Driver Squib Term Shorted to Battery
NOTE: This code becomes active and stored as soon as the malfunction is detected.
WHEN MONITORED
Continuously with ignition on.
SET CONDITION
With the voltage on, the driver airbag line 1 or line 2 circuit(s) is other than expected.
POSSIBLE CAUSES
-
Driver airbag line 1 short to voltage
-
Driver airbag line 2 short to voltage
-
Faulty clockspring
-
Faulty airbag control module
Driver Squib Term Shorted to Ground
NAME OF CODE
Driver Squib Term Shorted to Ground
NOTE: This code becomes active and stored as soon as the malfunction is detected.
WHEN MONITORED
Continuously with ignition on.
SET CONDITION
With voltage and current on, the driver airbag line 1 or line 2 circuit(s) is other than expected.
POSSIBLE CAUSES
-
Driver airbag line 1 short to ground potential
-
Driver airbag line 2 short to ground potential
-
Faulty clockspring
-
Faulty airbag control module
Loss of Ignition Run Only
NAME OF CODE
Loss of Ignition Run Only
NOTE: This code becomes active as soon as the condition is detected (this is not a stored code).
WHEN MONITORED
Continuously with ignition on.
POSSIBLE CAUSES
-
Open ignition run circuit
-
Open fuse
-
Ignition run circuit short to ground
-
Loose or poor connection at connector terminals
Loss of Ignition Run/Start
NAME OF CODE
Loss of Ignition Run/Start
NOTE: This code becomes active and stored as soon as the malfunction is detected.
WHEN MONITORED
Continuously with ignition on.
POSSIBLE CAUSES
