Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Electronic Brake Control Module: Service and Repair
Installation
Remove/Install CAB
1. Install the Controller Antilock Brake (CAB) on the valve block of the Hydraulic Control Unit (HCU).
CAB Attaching Bolts
2. Install the 4 bolts mounting the CAB to the valve block of the HCU. Tighten the CAB mounting bolts to a torque of 2 Nm (17 inch lbs.).
Pump Motor To CAB Wiring Harness
3. Plug the pump/motor wiring harness into the CAB.
