Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Power Window Switch: Testing and Inspection
Power Window and Vent Switch Test
1. Remove the driver or passenger door power window switch and bezel assembly from door trim panel.
Power Window Master Switch Connector
Driver Door Power Window Switch Test
2. Using an ohmmeter, Test driver door switch for continuity.
* MUST TEST WITH B+ ON PIN 9 AND GROUND ON PIN 13 FOR CONTINUITY BETWEEN PINS 11 AND 6
Passenger Door Power Window Switch
3. Test passenger door switch for continuity.
