Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
key removed from lock cylinder and brake pedal depressed, attempt to shift out of park. If the lever moves out of the park position you must repeat
steps 11 and 12 of the installation procedure.
13. Install the steering column fixed shroud on the steering column using its 2 mounting screws.
14. Install the trim bezel on the instrument panel above the steering column. The trim bezel is mounted to the instrument panel using 2 screws (one on
each side of the column) and retaining clips.
15. Install the lower steering column shroud on the steering column. Install and securely tighten the center screw attaching the lower shroud to the tilt
head on the column.
16. Install the upper steering column shroud over the tilt head of the steering column snapping it into place on the lower shroud. Install and securely
tighten the 2 remaining screws attaching the upper shroud to the lower shroud.
17. Install the steering column cover liner on the instrument panel below the steering column. Install and securely tighten the 10 bolts attaching the
steering column cover liner to the instrument panel.
18. Install the parking brake pedal release cable on the parking brake release lever in the lower steering column cover.
19. Install the lower steering column trim cover on the instrument panel below the steering column.
Install and securely the screws attaching the lower steering column cover to the instrument panel.
20. Connect the negative (ground) cable on the battery terminal.
