Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Front Steering Knuckle: Service and Repair
Removal
1. Raise vehicle on jack stands or centered on a frame contact type hoist.
2. Remove the cotter pin and nut lock from the end of the stub axle.
3. Remove the wheel and tire assembly from the vehicle.
4. Remove the wave washer from the end of the stub axle.
CAUTION: Wheel bearing damage will result if after loosening hub nut, vehicle is rolled on the ground or the weight of the vehicle is allowed to
be supported by the tires.
5. With the vehicle's brakes applied to keep hub from turning, loosen and remove the stub axle to hub nut.
6. Remove the 2 front disc brake caliper to steering knuckle attaching bolts.
