Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
4.
Push back the insulating wrap on the P/S return hose to expose the return hose to steel tube connection and disconnect the hose from the tube
(Figure 6). Allow the P/S fluid to drain then dispose of the fluid properly.
5.
Remove the nut attaching the outer tie rod end to the steering knuckle by holding the tie rod end stud stationary with an 11/32 in. socket while
turning the nut with a wrench (Figure 7). Repeat for the other side.
6.
Remove both of the tie rod ends from the steering knuckles using Special Tool MB-990635 or MB-991113 (Figure 8).
