chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Wheels and Tires|Balance|Page 6982 > < General Information|Page 6979
Page 1
background image

Wheels: Service and Repair
Balance

Balancing need is indicated by vibration of seats, floor pan, or steering wheel. The vibration will be noticed mostly when driving over 90 km/h (55 mph)
on a smooth road.

It is recommended that a two plane dynamic balancer be used when a wheel and tire assembly require balancing. Static balancing should be used only
when a two plane balancer is not available.

Off-vehicle tire and wheel balancing is recommended to be used on this vehicle.

NOTE:  If on vehicle equipment is being used to balance the tire/wheel assemblies, remove the opposite tire/wheel from the vehicle.

Fig. 7

For static balancing, find the location of heavy spot on tire/wheel causing the imbalance. Counter balance wheel directly opposite the heavy spot.
Determine weight required to counterbalance the area of imbalance. Place half of this weight on the inner rim flange and the other half on the outer rim
flange.

Wheels and Tires|Balance|Page 6982 > < General Information|Page 6979