chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Wheels and Tires|Service and Repair > < General Information|Page 6978
Page 3
background image

Fig. 6

Check wheel lateral run out. It should be no more than 0.8 mm (0.032 inch).
If the point of greatest wheel radial run out is near the original chalk mark, remount the tire on the rim 180 degrees from its original position.
Recheck the run out. If this does not reduce the run out to an acceptable level, replace the wheel and/or the tire.

Wheels and Tires|Service and Repair > < General Information|Page 6978