Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Seals and Gaskets: Service and Repair
Drive Pinion Seal and/or Rear Overrunning Clutch Seal
The rear drive line module must be removed to service these seals. The drive pinion seal is located in the front carrier cover, behind the overrunning
clutch rear seal. The overrunning clutch seal must be removed to gain access to the drive pinion seal. Do not reuse overrunning clutch seal.
REMOVAL
1. Remove rear drive line module from vehicle.
Overrunning Clutch Case To Rear Carrier Bolts
2. Remove overrunning clutch case to rear carrier bolts.
Separate Cases
3. Separate overrunning clutch case from differential carrier case.