Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Seals and Gaskets: Service and Repair
Rear Differential Seal Replacement
Rear Drive Line Module Oil Seal Location
The rear drive line module assembly does not have to be removed from vehicle to service the carrier output shaft seals.
The output flange seals are located on the rear carrier unit.
REMOVAL
Inner Half Shaft Bolts
1. Remove inner half shaft retaining bolts.
CAUTION: Do not allow half shafts to hang freely
2. Support inner side of half shaft with mechanics wire or equivalent.
