chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Drive Pinion Seal and/or Rear Overrunning Clutch Seal|Page 5134
Page 3
background image

2. Install oil seal with special tool MD998334.

Installing Output Shaft

3. Install output shaft. Lightly tap shaft to seat retainer ring into differential side gear.
4. Check differential fluid level, fill as required.

Drive Axles, Bearings and Joints > < Drive Pinion Seal and/or Rear Overrunning Clutch Seal|Page 5134