Town & Country Van AWD V6-230 3.8L VIN L SMFI (1998)
Seals and Gaskets: Service and Repair
Input Shaft Cover Seal Replacement
The power transfer unit input shaft cover seal is the larger of the two seals located on the inside of the end cover. The differential bearing cup must be
removed to service this seal.
The Power Transfer Unit must be removed from vehicle to perform this operation.
REMOVAL
P.T.U End Cover Bolts
1. Remove P.T.U. end cover bolts.
End Cover Removal
2. Gently tap on end cover ears to separate cover from case.
