chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Power Sliding Door - Noise During Operation|Page 6762 > < Power Sliding Door - Noise During Operation|Page 6756
Page 1
background image

Lower Sliding Door Rail: All Technical Service Bulletins
Power Sliding Door - Noise During Operation

NUMBER: 23-33-00

GROUP: Body

DATE: Sep. 15, 2000

SUBJECT:
Sounds Associated With Power Sliding Door Operation

OVERVIEW:
This bulletin involves applying Door-Ease(R)to areas of the power sliding door tracks.

MODELS:
2001

(RS)

Town & Country/Caravan/Voyager

2001

(RG)

Chrysler Voyager (International Markets)

SYMPTOM/CONDITION:
Some vehicles may exhibit a growling sound when being slid and/or a ratcheting/creaking sound when the Power Sliding Door (PSD) is cinching closed.

DIAGNOSIS:
Open and close the PSD manually. If a growl sound is heard coming from the lower track area, perform the Repair Procedure. Open and close the PSD
using the power feature, if a ratcheting/creaking sound is heard as the PSD cinches closed, perform the Repair Procedure.

PARTS REQUIRED:

REPAIR PROCEDURE:
THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND DOES NOT REQUIRE HOISTS OR
OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT. 

1.

Wipe load-bearing flange (Figure 1) clean over whole length of the lower hinge track with a clean damp cloth. Let dry.

2.

Apply a generous amount of Door-Ease(R) stick lubricant on the load-bearing flange of the lower hinge track and rub over whole length. Presence
of Door-Ease(R) on sidewall of track and/or small down-turned flange is ok.

3.

Using thumb and/or finger(s), work the just applied Door-Ease(R) around on the load-bearing flange to ensure even, consistent coverage.

4.

Inspect to verify there is 100% coverage of load bearing flange with Door-Ease(R). If not, apply more Door-Ease(R) and repeat step 3.

Power Sliding Door - Noise During Operation|Page 6762 > < Power Sliding Door - Noise During Operation|Page 6756