Voyager L4-2.4L VIN B (2001)
5.
Wipe clean the area of the center track that is cross-hatched and shaded in Figure 2 with a clean damp cloth. Let dry.
6.
Apply Door-Ease(R) stick lubricant to the center hinge track area shown as shaded in Figure 2.
7.
Using thumb and/or finger(s), work the just applied Door-Ease(R) around on the load bearing flange to ensure even, consistent coverage in the
shaded area
8.
Inspect to verify there is 100% coverage of load bearing flange with Door-Ease(R). If not, apply more Door-Ease(R) and repeat step 6
9.
Open and close the PSD manually and with the power feature to verify repair.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE: 68 - Noisy