Voyager L4-2.4L VIN B (2001)
Radiator Cooling Fan Motor: Service and Repair
REMOVAL
There are no repairs to be made to the fan or shroud assembly. If the fan is warped, cracked, or otherwise damaged, it must be replaced as an
assembly.
1. Remove the radiator upper crossmember.
2. Disconnect the radiator fan electrical connectors.
3. Remove radiator fan(s) retaining screw.
4. Remove the radiator fan(s) by lifting upward to release from mounts.
INSTALLATION
1. Install the radiator fan(s) into mounts and attaching clips on the radiator.
2. Install radiator fan(s) attaching screws . Tighten to 5 Nm (45 inch lbs.).
3. Connect the radiator fan(s) electrical connectors.
4. Install the radiator upper support crossmember.
5. Install the upper radiator mounts to the crossmember bolts, if removed. Tighten to 8 Nm (70 inch lbs.).
6. Install the radiator upper hose to the support clip (2.4L engine).