Voyager L4-2.4L VIN B (2001)
6. For rear mount bracket removal, remove the bolts attaching bracket to transaxle (Fig. 86).
7. Remove rear mount bracket.
INSTALLATION
1. Install rear mount bracket, if removed (Fig. 86).
2. Install the rear mount and bolts (Fig. 85). Tighten bolts to 54 Nm (40 ft. lbs.).
3. Install the mount through bolt to the mount and bracket (Fig. 85). Tighten through bolt to 54 Nm (40 ft. lbs.).
4. Install the rear mount heat shield (Fig. 84).
5. Lower vehicle on hoist.
