Voyager L4-2.4L VIN B (2001)
Blower Motor Switch: Description and Operation
BLOWER SWITCH - FRONT
The rotary Blower Switch has five positions, Low, M1, M2, M3, and High. The Power Switch must be on to make the Blower Switch active.
Toggling the Power Switch results in the A/C - Heater Control Module sending a request to the FCM to provide blower motor activation or
deactivation respectively.
BLOWER SWITCH - REAR BLOWER FRONT CONTROL SWITCH
The rotary Blower Switch has five positions, Rear, OFF; Low, Med, and High. The Power Switch must be on to make the Blower Switch active.
The Blower Switch must be in the Rear position to make the Rear Blower Rear Control active. Toggling the Power Switch results in the A/C -
Heater Control Module sending a request to the FCM to provide blower motor activation or deactivation respectively.
REAR BLOWER REAR CONTROL
Switch Operation
The A/C - Heater Control Module's Power Switch must be ON to make the Rear Blower Front Control Switch active. The Rear Blower Front
Control Switch must be in the Rear position to make the Rear Blower Rear Control active.
Blower Switch
The rotary Blower Switch has three positions, Low, Med, and High. Toggling the A/C - Heater Control Module's Power Switch on and positioning
the Rear Blower Front Control Switch in the Rear position results in the A/C - Heater Control Module sending a request to the FCM to provide
blower motor activation. Toggling the A/C - Heater Control Module's Power Switch off or rotating the Rear Blower Front Control Switch OFF of
the Rear position results in the A/C - Heater Control Module sending a request to the FCM to provide blower motor deactivation.