Voyager L4-2.4L VIN B (2001)
2.
Install the foam seal onto the drain tube connector making sure it is fully seated into the recess of the connector (Fig. 1).
3.
Install the drain tube connector to the wiper module making sure it is seated correctly.
4.
If the accessory drive belt has jumped off the pulleys, inspect the belt for damage and replace if necessary. Follow the procedures in the 2001 RS
Service Manual for accessory drive belt installation and refer to the 2001 Front Wheel Drive Labor Operation Time Schedule book for the
appropriate operation number, failure code, and time allowance.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
