Voyager L4-2.4L VIN B (2001)
Throttle Body: Specifications
Throttle Body Bolts .............................................................................................................................................28 Nm (20.65 Ft. Lbs) (250 ± 50 In. Lbs).
The composite manifolds uses special Plastic screws. The factory installed Plastic screws can be removed and installed up to 5 times. Do not exceed the
specified torque. These screws must be installed slowly (less than 600 rpms) to avoid melting the parent material. There are service repair screws
available for repair. They require a higher torque than the original screws..
