chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Oil Pressure Sensor > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Specifications|Page 907

Voyager L4-2.4L VIN B (2001)

Page 1
background image

Manifold Absolute Pressure (MAP) Sensor: Service and Repair

REMOVAL

1. Disconnect the negative battery cable.

Fig. 15 MAP Sensor

2. Disconnect electrical connector and vacuum hose from MAP sensor.
3. Remove two screws holding sensor to the intake manifold.

INSTALLATION

1. Install sensor.
2. Install two screws and tighten.
3. Connect the electrical connector and vacuum hose to the MAP sensor.
4. Connect the negative battery cable.

Oil Pressure Sensor > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Specifications|Page 907