Voyager V6-3.0L VIN 3 (2000)
Keyless Entry Transmitter Battery: Service and Repair
REMOVAL
RKE Transmitter Battery Replacement
1. With the transmitter buttons facing down, use a coin to pry the two halves of the transmitter apart. Make sure not to damage the rubber gasket
during removal.
2. Remove the battery from the transmitter case.
INSTALLATION
1. Replace the batteries. Avoid touching the new batteries with your fingers, Skin oils may cause battery deterioration. If you touch a battery, clean it
off with rubbing alcohol.
2. To assemble the transmitter case, snap the two halves together.
