Voyager V6-3.0L VIN 3 (2000)
Remote Switch: Description and Operation
Remote Radio Switch Operational View
A remote radio control switch option is available on LXI models sold in North America with the AM/FM/ CD/Cassette/3-band Graphic Equalizer (RAZ
sales code) radio receiver. Two rocker-type switches are mounted on the back (instrument panel side) of the steering wheel spokes. The switch on the left
spoke is the seek switch and has seek up, seek down, and preset station advance functions. The switch on the right spoke is the volume control switch
and has volume up, and volume down functions.
These switches are resistor multiplexed units that are hard-wired to the Body Control Module (BCM) through the clockspring. The BCM sends the
proper messages on the Chrysler Collision Detection (CCD) data bus network to the radio receiver. For diagnosis of the BCM or the CCD data bus, the
use of a DRB scan tool and the proper Diagnostic Procedures are recommended. For more information on the operation of the remote radio switch
controls, refer to the owner's manual in the vehicle glove box.
