Voyager V6-3.0L VIN 3 (2000)
Fig. 6
16. Lower clip for outside door handle link to bottom of slot in mechanism and engage link to clip Fig. 6).
NOTE: Move link rearward until movement stops before engaging link to clip.
17. Place rear latch link in position on control moving link rearward until movement stops.
18. Engage clip to hold rear latch release link latch/lock control.
19. Push inside lock link button downward to disengage rigging cam.
20. Verify sliding door operation.
21. Install latch/lock cover.
22. Insure that enough adhesive remains securely retain the watershield. Replace as necessary.
23. Place the watershield into position and press securely to adhesive making sure to properly route wiring and linkages.
24. Install sliding door stop bumper.
25. Install sliding door trim panel.
