Voyager V6-3.0L VIN 3 (2000)
Carpet: Service and Repair
CARPETS AND FLOOR MATS
REMOVAL
1. Remove front seats.
2. Remove front center console.
3. Remove the remaining seats. Refer to the Owner's Manual for the proper procedures.
4. Remove front cowl panels and sill plates.
5. Remove sliding door sill plates. Refer to Trim Panel.
6. Remove the cargo organizer, if equipped.
7. Remove liftgate scuff plate. Refer to Trim Panel.
8. Remove lower B-pillar trim covers.
9. Remove D-pillar trim covers.
10. Remove Quarter trim panels.
Fig. 5
11. Remove floor escutcheons (Fig. 5).
12. Remove the floor console trays.
13. Remove push-in fasteners attaching carpet to floor in front seat area.
14. Roll carpet from under instrument panel to center of sliding door.
15. Roll carpet forward away from rear door opening.
