Voyager V6-3.0L VIN 3 (2000)
Fig. 12
2. With link arm toward rear of vehicle, push lock cylinder into door handle until clip snaps into place (Fig. 12).
3. Insert lock linkage into door latch.
4. Engage clip to hold door lock linkage to latch.
5. Insert latch linkage into door latch.
6. Engage clip to hold door latch linkage to latch.
7. Install push in fasteners attaching VTSS switch harness to inner door reinforcement bar, if equipped.
8. Connect VTSS switch connector into door harness, if equipped.
9. Verify door latch operation.
10. Install watershield and door trim panel.
