Voyager V6-3.0L VIN 3 (2000)
Parking Brake Cable: Service and Repair
Front Parking Brake Cable
REMOVAL
1. Raise vehicle on jackstands or centered on a hoist. See Hoisting in Maintenance.
2. Manually release the automatic self-adjusting mechanism tension of the parking brake lever (pedal) assembly. in Parking Brake System, Parking
Brake Tensioner, Service and Repair, Service Procedures the required procedure.
3. Remove the intermediate and left rear park brake cable from the park brake cable equalizer).
4. Remove the front park cable housing retainer from body outrigger bracket). Cable is removable by sliding a 14 mm box wrench over cable retainer
and compressing the three retaining fingers. Alternate method is to use an aircraft type hose clamp and screwdriver.
5. Lower vehicle.
6. Remove the left front door sill molding.
7. Remove the left front kick panel for access to the park brake cable and park brake pedal assembly.