Voyager V6-3.0L VIN 3 (2000)
Fig. 87
7. Connecting rod front mark 72 must always face forward, toward timing belt end. (Fig. 87)
8. Install the piston and connecting rod assembly into there respective bore from the cylinder block top.
CAUTION: Piston assemblies are not to be interchanged from bank to bank.
Fig. 88
9. Check alignment marks made during disassembly and that bearing position notches new or used are on the same side as shown in (Fig. 88).
10. Install the following components:
-
Oil pan
-
Cylinder heads
-
Timing belt
-
Cylinder head covers
-
Intake manifold/plenum
