chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Blend Door Actuator Replacement|Page 4584 > < Blend Door Actuator Replacement|Page 4582
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Fresh Air/Recirculation Actuator Replacement

REMOVAL

1. Pull back on carpeting on the right lower floor.
2. Remove Recirc. door actuator connector.

Recirculation Door Actuator

3. Remove mounting screws for Recirc. actuator.
4. Remove Recirc. actuator.
5. Disengage actuator linkage at Recirc. door.
6. Remove actuator from vehicle.

INSTALLATION

1. For installation, reverse the above procedures.
2. Perform the HVAC control Calibration Diagnostic and Cooldown test.

Blend Door Actuator Replacement|Page 4584 > < Blend Door Actuator Replacement|Page 4582