Voyager V6-3.0L VIN 3 (2000)
9. Remove suction line mounting nut at compressor.
10. Remove suction line mounting bracket.
11. Remove suction line.
INSTALLATION
For installation, reverse the above procedures.
-
Install the stud to the evaporator sealing plate and tighten 7 to 11 Nm (64 to 96 in. lbs.) torque.
-
Install new O-rings.
-
Install two-piece line in place of original part.
-
Assemble line halves after it is installed on vehicle.
-
Evacuate and recharge A/C system.