Voyager V6-3.0L VIN 3 (2000)
Housing Assembly HVAC: Description and Operation
CONDENSATE DRAIN
Condensation from the evaporator housing is drained by a rubber tube through the cowl panel and on to the ground. This tube must be kept open to
prevent water from collecting in the bottom of the housing.
The tapered end of the drain tube is designed to keep contaminants from entering the Heater A/C unit housing. If the tube is pinched or blocked,
condensate cannot drain, causing water to back up and spill into the passenger compartment. It is normal to see condensate drainage below the
vehicle. If the tube is damaged, it should be replaced.
