Voyager V6-3.0L VIN 3 (2000)
Fig. 40 PCM 40-Way Connectors
8. Squeeze tabs on 40-way connector. Pull connector rearward to remove from PCM. Remove both way connectors.
Fig. 41 PCM Removal/Installation
9. Remove 3 screws holding PCM to fende.
10. Remove PCM from vehicle.
INSTALLATION
1. Connect 2 40-Way electrical connectors to PCM .
2. Install PCM. Tighten mounting screws.
3. Install PDC bracket.
4. Install battery.
